Z0109MA 2AL2

Z01 Datasheet Standard 1 A Triacs Features A2 G A1 • On-state rms current, IT(RMS) 1 A • Repetitive peak off-state voltage, VDRM/VRRM 600 or 800 V • Triggering gate current, IGT (Q1) 3 to 25 mA A2 Applications A1 A2 G A1 G A2 SOT-223 TO-92 AC switching Home appliances Description A2 A1 • • The Z01 series is suitable for general purpose AC switching applications. These devices are typically used in applications such as home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... G SMBflat-3L Different gate current sensitivities are available, allowing optimized performance when driven directly through microcontroller. Product status link Z01 Product summary IT(RMS) 1A VDRM/VRRM 600, 800 V IGTstandard 3 to 25 mA DS2116 - Rev 13 - July 2023 For further information contact your local STMicroelectronics sales office. www.st.com Z01 Characteristics 1 Characteristics Table 1. Absolute maximum ratings Symbol Parameters ITSM I2t dl/dt IGM PG(AV) Tstg Tj RMS on-state current (full sine wave) Unit 1 A Ttab = 90 °C SOT-223 IT(RMS) Value TL = 50 °C TO-92 SMBflat-3L Ttab = 107 °C Non repetitive surge peak on-state current F = 50 Hz tp = 20 ms 8 (full cycle, Tj initial = 25 °C) F = 60 Hz tp = 16.7 ms 8.5 I2t value for fusing tp = 10 ms Critical rate of rise of on-state current A 0.35 A2s F = 120 Hz Tj = 125 °C 20 A/µs tp = 20 µs Tj = 125 °C 1 A Tj = 125 °C 1 W Storage junction temperature range -40 to +150 °C Operating junction temperature range -40 to +125 °C IG = 2 x IGT , tr ≤ 100 ns Peak gate current Average gate power dissipation Table 2. Electrical characteristics (Tj = 25 °C, unless otherwise specified) Value Symbol IGT(1) Parameters I - II - III VD = 12 V, RL = 30 Ω VGT VGD VD = VDRM, RL = 3.3 kΩ, Tj = 125 °C IH(2) IT = 50 mA IL IG = 1.2 IGT dV/dt(2) (dV/dt)c(2) Z01 Quadrant IV Max. Unit 03 07 09 10 3 5 10 25 5 7 10 25 mA All Max. 1.3 V All Min. 0.2 V Max. 7 10 10 25 mA I - III - IV Max. 7 10 15 25 II Max. 15 20 25 50 VD = 67 % VDRM gate open, Tj = 110 °C Min. 10 20 50 100 V/µs (dI/dt)c = 0.44 A/ms, Tj = 110 °C Min. 0.5 1 2 5 V/µs mA 1. Minimum IGT is guaranteed at 5 % of IGT max. 2. For both polarities of A2 referenced to A1 DS2116 - Rev 13 page 2/16 Z01 Characteristics Table 3. Static electrical characteristics Symbol VT(1) VTO(1) Rd IDRM IRRM Test conditions Tj Value Unit ITM = 1.4 A, tp = 380 µs 25 °C Max. 1.60 V Threshold on-state voltage 125 °C Max. 0.95 V Dynamic resistance 125 °C Max. 400 mΩ 5 µA 0.5 mA Max. value Unit 25 °C VDRM = VRRM 125 °C Max. 1. For both polarities of A2 referenced to A1 Table 4. Thermal resistance Symbol Parameters Rth(j-t) Max. junction to tab (AC) Rth(j-l) Max. junction to lead (AC) Rth(j-a) Junction to ambient (S(1) = 5 cm²) Junction to ambient SOT-223 25 SMBflat-3L 14 TO-92 60 SOT-223 60 SMBflat-3L 75 TO-92 150 °C/W 1. Copper surface under tab. DS2116 - Rev 13 page 3/16 Z01 Characteristics (curves) 1.1 Characteristics (curves) Figure 1. Maximum power dissipation versus on-state RMS current (full cycle) Figure 2. RMS on-state current versus lead (TO-92) or tab (SOT-223, SMBflat-3L) temperature (full cycle) P(W) 1.2 1.50 IT(RMS)(A) α =180 ° 1.25 1.0 1.00 0.8 0.75 0.6 0.50 0.4 I T(RMS) (A) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Tlead or Ttab (°C) 0 1.0 25 50 75 100 125 Figure 4. Relative variation of thermal impedance versus pulse duration (Zth(j-a)) Figure 3. On-state rms current versus ambient temperature(free air convection full cycle) 1.2 TO-92 0.0 0.00 0.0 SOT-223 0.2 180° 0.25 SMBflat-3L K=[Z th(j-a) /Rth(j-a) ] IT(RMS)(A) 1.00 Z01xxA 1.0 Rth(j-a) = 60°C/W (SOT-223) Z01xxMUF Copper surface area = 5cm² 0.8 Rth (j-a) = 100°C/W (SMBflat-3L) 0.6 0.10 Z01xxN Rth(j-a) = 150°C/W (TO-92) 0.4 0.2 t p (s) Tamb (°C) 0.01 0.0 0 25 50 75 100 125 Figure 5. Relative variation of holding current and latching current versus junction temperature (typ. values) 2.5 IH, IL [Tj] /IH, IL [Tj =25°C] 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 Figure 6. Relative variation of gate trigger current (IGT) and voltage (VGT) versus junction temperature 3.0 IGT, V GT[T j ] / IGT, V GT[T j =25 ° C] 2.5 2.0 IGT Q1-Q2 IGT Q3 2.0 1.5 IGT Q4 1.5 1.0 1.0 IL 0.5 0.0 -50 -25 DS2116 - Rev 13 0 25 50 0.5 IH Tj (°C) 75 100 VGT Q1-Q2-Q3-Q4 125 0.0 -50 Tj (°C) -25 0 25 50 75 100 125 page 4/16 Z01 Characteristics (curves) Figure 7. Surge peak on-state current versus number of cycles Figure 8. Non-repetitive surge peak on-state current and corresponding value of I2t sinusoidal pulse width ITSM(A) 9 ITSM (A), I2t (A 2s ) 100. 0 8 Tj initial = 25°C dI/dt li mi tati on : 20A/µs T = 20 ms 7 ITSM One cy cle Non repetitive Tjinitial = 25 °C 6 10. 0 5 4 1. 0 3 I2t 2 Repetitive Tamb = 95 °C 1 Number of cycles 0 1 10 100 1000 Figure 9. On-state characteristics (maximum values) (ITM = f(VTM) 0. 10 1. 00 10. 00 Figure 10. Relative variation of critical rate of decrease of main current (dI/dt) versus junction temperature ITM(A) (dI/dt )c [(d V/dt )c] / Specifie d (dI/dt )c 10.0 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Tj = Tjmax. 1.0 Tj=max. Vt0=0.95 V Rd=400 mΩ Tj = 25°C VTM (V) 0.1 0.0 t p ( ms ) 0. 1 0. 01 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Figure 11. Relative variation of critical rate of decrease of main current (dI/dt) versus junction temperature (dI/dt )c [Tj ] / (dI/dt )c [Tj S pecifie d] Z0107 (dV/dt )c (V/µs) 0.1 1 .0 100.0 Rth(j-a )( °C/W) 150 140 130 4 SMBflat-3L 120 3 110 2 90 100 SOT223 80 1 DS2116 - Rev 13 10.0 160 5 0 0 Z0110 Figure 12. SOT-223 and SMBflat-3L thermal resistance junction to ambient versus copper surface under case 170 6 Z0109 Z0103 70 Tj (°C) 25 50 60 75 100 125 SCU( cm²) 50 0 1 2 3 4 5 page 5/16 Z01 Characteristics (curves) Figure 13. Relative variation of static dV/dt immunity versus junction temperature (gate open) 6 dV/dt [ T j ] / dV/dt [ T j =125 °C] VD=VR=402V 5 4 3 2 1 T j (°C) 0 25 DS2116 - Rev 13 50 75 100 125 page 6/16 Z01 Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 2.1 SOT-223 package information • • Epoxy meets UL94, V0 Lead free plating + halogen-free molding resin Figure 14. SOT-223 package outline V A A1 c B e1 D B1 4 H E 1 2 3 e DS2116 - Rev 13 page 7/16 Z01 SOT-223 package information Table 5. SOT-223 package mechanical data Dimensions Inches(1) Millimeters Ref. Min. Typ. A Max. Min. Typ. 1.80 A1 0.02 0.10 Max. 0.0709 0.0008 0.0039 B 0.60 0.70 0.85 0.024 0.0276 0.0335 B1 2.90 3.00 3.15 0.114 0.1181 0.1240 c 0.24 0.26 0.35 0.009 0.0102 0.0138 D 6.30 6.50 6.70 0.248 0.2559 0.2638 e 2.3 0.0906 e1 4.6 0.1811 E 3.30 3.50 3.70 0.130 0.1378 0.1457 H 6.70 7.00 7.30 0.264 0.2756 0.2874 V 10° max. 1. Inches only for reference Figure 15. SOT-223 footprint (dimensions in mm) 3.25 1.32 5.16 7.80 1.32 2.30 DS2116 - Rev 13 0.95 page 8/16 Z01 TO-92 package information 2.2 TO-92 package information • • Lead free plating + halogen-free molding resin Epoxy meets UL94, V0 Figure 16. TO-92 package outline c A a B C b D F E Table 6. TO-92 package mechanical data Dimensions Inches(1) Millimeters Ref. Min. A Typ. Max. Min. 1.35 B Typ. 0.0531 4.70 C Max. 0.1850 2.54 0.1000 D 4.40 0.1732 E 12.70 0.5000 F 3.70 0.1457 a 0.50 0.0197 b 1.27 c 0.0500 0.48 0.0189 1. Inches dimensions given for information DS2116 - Rev 13 page 9/16 Z01 SMBflat-3L package information 2.3 SMBflat-3L package information • • Epoxy meets UL94, V0 Lead-free package Figure 17. SMBflat-3L package outline Note: This package drawing may slightly differ from the physical package. However, all the specified dimensions in the following table are guaranteed. Table 7. SMBflat-3L mechanical data Dimensions Millimeters Ref. Min. DS2116 - Rev 13 Typ. Inches (dimensions are for reference only) Max. Min. Typ. Max. A 0.90 1.10 0.0354 0.0433 b 0.35 0.65 0.0138 0.0256 b1 1.95 2.20 0.0768 0.0866 c 0.15 0.40 0.0059 0.0157 D 3.30 3.95 0.1299 0.1555 E 5.10 5.60 0.2008 0.2205 E1 4.05 4.60 0.1594 0.1811 L 0.75 1.50 0.0295 0.0591 L2 0.60 0.0236 e 1.60 0.0630 page 10/16 Z01 SMBflat-3L package information Figure 18. Footprint recommendations, dimensions in mm (inches) 5.84 (0.230) 0.51 (0.020) 2.07 (0.082) 2.07 (0.082) 0.51 (0.020) 1.20 (0.047) 3.44 (0.136) 1.20 (0.047) mi lli met ers (inc hes ) Note: DS2116 - Rev 13 This drawing may not be in scale; however, all the specified dimensions are guaranteed. page 11/16 Z01 Ordering information 3 Ordering information Figure 19. Ordering information scheme Z 01 03 M A [BLANK] 1AA2 Triac series Current 01 = 1 A Sensitivity 03 = 3 mA 07 = 5 mA 09 = 10 mA 10 = 25 mA Voltage M = 600 V N = 800 V Package A = TO-92 N = SOT-223 UF = SMBflat-3L BLANK = Check Table 9. Ordering information Packing mode 1AA2 = TO-92 bulk 2AL2 = TO-92 ammopack 5AL2 = TO-92 tape and reel 5AA4 = SOT-223 tape and reel 7” 6AA4 = SOT-223 tape and reel 13” Blank = SMBflat-3L tape and reel 13” DS2116 - Rev 13 page 12/16 Z01 Product selector 3.1 Product selector Table 8. Product selector Part Number DS2116 - Rev 13 600 800 Z0103MA Z0103NA Z0103MN Z0103NN Z0107MA Z0107NA Z0107MN Z0107NN Z0109MA Z0109NA Z0109MN Z0109NN Z0110MA Z0110NA Z0110MN Z0110NN Sensitivity Type TO-92 3 mA SOT-223 TO-92 5 mA 10 mA 25 mA Z0103MUF 3 mA Z0107MUF 5 mA Z0109MUF 10 mA Package SOT-223 TO-92 Standard SOT-223 TO-92 SOT-223 SMBflat-3L page 13/16 Z01 Ordering information 3.2 Ordering information Table 9. Ordering information Order code(1) Marking(1) Package Weight Z01xxyA 1AA2 Z01xxyA 2AL2 Z01xxyA TO-92 0.2 g Z01xxyA 5AL2 Base qty. Delivery mode 2500 Bulk 2000 Ammopack 2000 Z0103yN 5AA4 Z3y 1000 Z0103MN 6AA4 Z3M 4000 Z0107yN 5AA4 Z7y Z0107MN 6AA4 Z7M Z0109yN 5AA4 Z9y 1000 Z0109NN6AA4 Z9N 4000 Z0103MUF Z3M Z0107MUF Z7M Z0109MUF Z9M SOT-223 0.12 g 1000 4000 Tape and reel 5000 SMBflat-3L 47 mg 5000 5000 1. xx = sensitive, y = voltage, and check Figure 19. Ordering information scheme. DS2116 - Rev 13 page 14/16 Z01 Revision history Table 10. Document revision history Date Revision Changes Oct-2001 4 Last update. 10-Feb-2005 5 Package: TO-92 tape and reel delivery mode 5AL2 added. Table 4 on page 2: typo. mistake corrected 09-May-2005 6 1. (dV/dt)c instead of (dI/dt)c 2. V/μs unit instead of A/ms DS2116 - Rev 13 21-Apr-2006 7 Reformatted to current standard. Table 2 on page 2: Typo corrected. Values for IGT split into two separate rows. 10-Oct-2010 8 Table 2: modified test conditions for (dV/dt)c. Changed “ambient” to “lead or tab” in Figure 2. 20-Oct-2010 9 Package: SOT-223 13” tape and reel added = 6AA4. 14-Dec-2010 10 02-May-2019 11 11-Apr-2023 12 Updated Figure 17 and Table 7. 19-Jul-2023 13 Updated Table 9. Added package SMBflat-3L. Updated dimensions in Table 6. Updated Figure 3 and Figure 12. Updated Table 5: Product Selector. Updated Table 9. Ordering information. Minor text changed. page 15/16 Z01 IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2023 STMicroelectronics – All rights reserved DS2116 - Rev 13 page 16/16